Aviation instrument panel shell

Hongke Mold has always been committed to the design, research and mold making, injection molding, and one-stop injection service of airline tableware injection molding molds. It has many imported high-precision equipment, and the processing accuracy is as high as 0.015mm, disposable aviation tableware uses precision injection molding equipment to undergo one-time injection molding at a high temperature of 260 degrees. Mould Name: Aviation Cutlery Tray Injection Mould Part Material: HIPS Mould...

Custom plastic injection over mould TPE testing instrument housing. In order to meet customer requirements, we continue to invest in the latest technology and equipped with the most advanced mold making, facilities. We have mold design, mold making, plastic injection molding, assembly capabilities. Over-molding is an injection molding process used to mold one plastic (commonly a rubber-like plastic called TPE ) over top of another component (substrate). The substrate is usually an...

Home appliances mould or household injection mold making and injection molding. We specializes in the manufacture of high-quality household appliances, such as electric toothbrush,vacuum cleaner, electric heater, electronic beauty device and rice cooker. Appliance molds are made from a combination of materials such as steel, aluminum, copper and brass to ensure durability and longevity. Mould Name: Home Appliance Shell Plastic Injection Molding Part Material: ABS Mould Insert Steel: S136...

Aviation seat parts are usually assembled from various plastic parts. This case is one of the side plastic parts of an aviation seat. The mold is made by S136 steel, which can meet the mold lifespan more than 500,000 shots. In the production of aviation plastic parts, PC is commonly used. The surface finish of this product is a common texture treatment, and the final product has a smooth appearance, high precision, and no obvious flash, which achieves superior quality. In the injection mold of...

Aviation Cutlery Tray is one of our Airline Tableware Mold making cases. The products are mainly used to meet the dining needs of flight attendant and passengers. The mould base steel is S50C, mold insert steel is 2083, 1*4 cavities, and surface finish of the cavity is polish. We adopted the gate way of cold runner sub gate, and using HIPS material when in injection molding. After our test on the mold, the surface of the product is smooth, with high gloss, without any sink marks and flashes....

Forehead Gun mold is one mold making case of our Medical Detection Parts Mould. The mold insert steel is S136, the mold lifespan can reach at least 500,000 shots, we used ABS material for injection molding production for this product. It has also been applied to the overmold process. Our overmold technology is proficient, and the overmold part of the finished product fits well with the substrate part. There is no flashes, and the edges match without sink marks. Mould Name: Forehead Gun Mould...

Aviation seat armrest mold is one familiar project in Aero Interior Parts Mold category. Mold base steel is S50C, mold insert steel is S136 and the mold life can reach 500,000 shots or more. We make texture surface finish for the cavity when in mold making, used to enhance the texture of product appearance. In injection molding, we use PPSU material for production. Product Name：Aviation seat armrest mold. Product Material: PPSU Lead Time: Mold making about 35-45 working days, injection molding...

This is the Aero Interior parts produced by our company's injection molding, which is an aero hand rest Mold. The mold base steel uses S50C, the mold insert steel uses S136 and the mold life is 500,000~1,000,000 cycles. We can provide customers with for mold and product color customization. Generally, the lead time for mold making is 25-30 days, and the lead time for injection molding is 10-15 days. Of course, this is estimated according to the complexity of the product. Our factory has passed...

This is a aviation injection mold for airplane wings parts designed and produced by our company. The aero structural components are integral to the design, construction, and operation of aerospace vehicles. They provide the necessary strength, stability, and support required for safe and efficient flight, while also contributing to aerodynamic performance and overall vehicle functionality. The development and production of these components involve a combination of engineering expertise,...

Full 3D detailed design, even including venting and part numbers, greatly reduces the error rate of design. The concept of processing integrated into the mould design, improves the design, so as to make mould easier to be processed and firmly control the quality from the source. We are rich experience in making aviation molds, including Aero Interior parts, Airline tableware, Aero Functional parts, Aero Structural components. We believe that the mould design is the source of the quality. Our...

Aero Interior parts/Aero Structural components/Aero Functional parts/Airline tableware belong to the mold making case of our Aero Parts Mould. This is an aviation reading light cover molds. The mold is made of high quality mold insert steel S136 steel and the mold life can reach 500,000 shots or more when the mold is well maintained. The hardness of the S136 steel reaches HRC48-52. The surface finish of the cavity is texture. Our texture is mature, high-quality, and the appearance of the...

This is an aviation cutlery tray plastic mold. The surface finish of the product is polished. The mold life is 500000~1000000 cycles, the mold insert steel is 2083, and the mold base is S50C. We can provide customers with customized mold services, including product colors. We would make a comprehensive review and analysis on the part in front of the mould design, including analysis of structure, shrinkage, draft angle and mold flow, then a DFM report will be sent to the customer, to help the...

Garden nursing tool housing mold/electrical moulds is one of our customer's customized cases of Power Tools Mould. This is a over mold. The mold is made of high quality mold insert steel H13 and the hardness of the steel reaches HRC48-52, the mold life can reach 500,000 shots or more when the mold is well maintained. The surface finish of the cavity is texture. Our texture is mature, high-quality, and the appearance of the texture is very uniform. The product material uses TPE, and the molding...

This is an electronic remote control shell mold and also an over mould. Our company has been designing and manufacturing molds since 2008, and has rich experience in Over Mold, Insert Mold and 2K mold. The surface finish of the cavity is texture, Our texture is mature, high-quality, and the appearance of the texture is very uniform. In injection molding production, we use TPE Shore 50 material, the material has high transparency, high resilience, environmental protection, non-toxic, high...

This product is an over mould for controller shell. Overmolding is a manufacturing process in which two or more different materials are combined to create a single, integrated component. Overmolding allows for the combination of materials with distinct properties, such as soft and rigid materials. This enables the creation of components that offer improved functionality, comfort, and performance. In injection molding production, we use TPE material. TPE materials combine the flexibility and...

This product is an over mould for controller shell. Overmolding is a manufacturing process in which two or more different materials are combined to create a single, integrated component. Overmolding can be used to add soft, tactile grips or ergonomic features to products, enhancing user comfort and usability. This is particularly useful in the design of tools, handles, and consumer electronics. In injection molding production, we use TPE material. TPEs are thermoplastic, meaning they can be...

This product is an custom plastic injection over mould for controller shell. Overmolding can provide effective sealing against moisture, dust, and other environmental factors. This is crucial for products that need to be watertight or resistant to harsh conditions. Overmolding with elastomeric materials can help dampen vibrations and reduce noise in products, making them more comfortable to use and extending their lifespan. In injection molding production, we use TPE material. TPEs are often...