PPSU Medical Molding

Specializing in medical detection parts mould making and injection molding. This is a cold runner injection mold for Forehead Gun Mold by ABS material. Forehead thermometer mold insert steel is S136. Mold life reach at least 500,000 cycles. Our factory is equipped with injection machines of various sizes and have 30~450 Ton injection machines. Mould Name: Forehead Gun Medical Plastic Housing Injection Mold Part Material: ABS Mould Cavity: 1+1 cavities Mould Base Steel: S50C Mould Insert Steel:...

Custom plastic injection over mould TPE testing instrument housing. In order to meet customer requirements, we continue to invest in the latest technology and equipped with the most advanced mold making, facilities. We have mold design, mold making, plastic injection molding, assembly capabilities. Over-molding is an injection molding process used to mold one plastic (commonly a rubber-like plastic called TPE ) over top of another component (substrate). The substrate is usually an...

Hongke is a professional TPE over mould power tool handle and hand tool handle mold making and injection molding. TPE handle over-molding will provide a soft touch, increase grip and give the product a stylish look. Handle parts are produced by insert molding in regular horizontal injection molding machines. First, the substrates are molded. Then after a few days, the substrates will be used for the overmolding with the second mold. This process is done manually. Mould Name: Handle Overmold...

Hongke has more than 20 years experience of disposable anaesthetic laryngoscope plastic blade mould. We are good at design, mold making and injection molding for medical devices. Making capabilities: design for medical parts mould equipment, manufacturing for medical inspection part mould and in house mold trial and injection molding for medical plastic parts. Parts material use PC and mould insert steel use S136. Mould Name: Disposable Anaesthetic Laryngoscope Plastic Blade Molding Gate Way:...

Home appliances mould or household injection mold making and injection molding. We specializes in the manufacture of high-quality household appliances, such as electric toothbrush,vacuum cleaner, electric heater, electronic beauty device and rice cooker. Appliance molds are made from a combination of materials such as steel, aluminum, copper and brass to ensure durability and longevity. Mould Name: Home Appliance Shell Plastic Injection Molding Part Material: ABS Mould Insert Steel: S136...

This Auto Structural components product is used for the composition of the car console. During the mold making, the mold uses 718 H steel, the hardness is HRC 33 - 38, the mold life can reach 300,000 to 400,000 shots, and the gate way is cold runner Sub gate. The parting surface of the product has high requirements for cooperation, and the exhaust port setting and depth control are very good, and there is no phenomenon of air trap. In injection molding production, we use PP material and the...

We have rich experience in injection mold making for Medical Inspection Part Mould, it is one type of our Medical Parts Mould. Medical Device Laryngoscope is an instrument used to examine and treat respiratory diseases. It consists of multiple parts, most of which usually require injection molds to manufacture. Usually there are laryngoscope head molds, laryngoscope handle molds, laryngoscope connecting tube molds, and laryngoscope light source molds. Manufacturing medical plastic molds...

The medical device laryngoscope is a device used to check and treat respiratory diseases. This is the injection molding case of our company's laryngoscope plastic parts. This mould insert steel is S136, the mold life can be over 500,000 shots, part material is ABS, and used cold runner system. It consists of multiple parts, such as: Laryngoscope Head Mold, Laryngoscope Handle Mold, Laryngoscope Connect Pipe Mold and so on. We specialized in mold making for Medical Nursing Parts Mould, Medical...

Medical repair anchor mold is used to manufacture medical repair anchors. Medical repair anchor is a medical device used to repair broken or cracked bone. This mold is usually made of high-strength metal material and has precise size and shape. We usually use PEEK material to injection molding for this type of repair anchor. We used S136 mold steel for mold making, this mold life can be reached 500,000 ~ 10,000,000 shots under made by this material. We specialized in mold making for Medical...

Medical Sample Collection Rack Molds, Medical Detection Parts Molds. This product is mainly used for collection during medical testing and sampling, such as blood sample collection rack. In the mold manufacturing, we use S136 steel, so that its service life can reach 500,000 shots or more if properly maintained. We used hot runner system named Kehua from Shenzhen, which can greatly improve production efficiency and reduce waste.The finished product has no obvious flash and sink marks. In...

This product is an injection molding case of the plastic part of the medical lung testing equipment. This case is a large mold, the mold steel material we used is H13, and the mold lifespan can be reached over 500,000 shots. In injection molding, we use ABS material, surface finish is texture. We specialized in mold making for Medical Nursing Parts Mould, Medical Repair Parts Mould, Medical Inspection Part Mould, Medical Detection Parts Mould . Every steps in the mold making process is...

A medical repair anchor mold is use to manufacture medical repair anchors. This mold made by PEEK materials, it has excellent corrosion resistance and high temperature resistance. This kind of products has very strict requirements on the precision of the mold, we made mold flow analysis before the mold design to ensure the balanced filling. The final test of the product is very excellence，no flash and no sink mark. The last but not least, we have rich experience in Medical Nursing Parts Mould,...

PSU is a high-performance engineering polymer, which has excellent chemical and mechanical properties, so the design of the PSU mould needs to be very rigorous. We used the top mold steel H13 to make this mold. The hardness is between HRC48-52, which can be better maximize the performance of the mold. After injection molding, the product has a refined appearance without flashes or sink marks. In addition, we are also experienced in various High Performance Material Parts Molds, such as PEEK...

PPSU Mould is used for injection molding of PPSU high-performance material products. The Mold steel is S136, carefully crafted with our sophisticated mold making technology and professional mold knowledge. Tailored to meet your specific requirements, 1*1 type injection molding of the cavity enables unrivaled product quality. Our molds are guaranteeing durability and reliability in production cycles of up to 500,000 shots, providing you with a high quality long-term solution. Our PPSU molds...

This is a babyplast mold made by our company, which can be injection molded to produce very precise medical products. The injection molding products of this mold are widely used in Fixation in Arthroscopy repair, especially rotator cuff (shoulder) and hip glenoid lip repair. Because PEEK requires a cavity surface temperature of up to 220°C, it is important to consider uniform tempering of the tooling during design. The thermal distribution in the tooling must be calculated and optimized...

We have extensive expertise in mold making for PEEK Mould. Due to the good heat resistance of PEEK material, the temperature span during injection molding usually needs to be between 320°C and 390°C. The temperature requirements of PEEK molds are also relatively high, often between 140 °C and 180 °C. The mold steel we chose S136 as the main mold making material, and the hardness level is HRC48-52, which ensures a solid performance. The mold configuration adopts a 1*1 cavity layout, and the...

We are an advanced manufacturer of medical molds, including: Medical Repair Parts Mould, Medical Inspection Parts Mould, Medical Detection Parts Mould, Medical Nursing Parts Mould. This is a medical mold made by our company, this mold is also called Babyplast mold. This Babyplast mold is very small and is generally used to make medical products and aviation precision parts. The injection molding products of this mold are widely used in Fixation in Arthroscopy repair, especially rotator cuff...

This product is Medical Repair Parts Mould. The injection molding products of this mold are used in Fixation in Arts copy copy copy cuff (shoulder) and hip glenoid lip copy. The mold has a small volume and is often used to make very precise products. It is widely used in the medical and aviation industries. The material used in this product is PEEK, cavity is 1*2, hot runner brand for YUDO. We can provide customers with mold plans according to product drawings, and customize product colors and...

Airline plastic meal box molds are an essential manufacturing tool for creating plastic tableware for airline crew and passengers, it belongs to Airline tableware. This mould is built with high-quality S136 steel, providing a lifespan over 500,000 shots. The multi-cavity design enables us to produce it at an impressive rate, meeting large scale production demands. This cup is created through precision ABS injection molding and finished with meticulous polishing, resulting in a beautifully...