PEEK Material

PEEK suture anchor are widely used for fixation in arthroscopic repairs, especially in rotator cuff (shoulder) and hip labrum repairs. We are very good at medical repair parts mould mold making and injection molding production. The injection moulding machine controls the process temperature of 400°C and injection pressure up to 3500 Bar, which is one key feature of a stable injection moulding process. Due to the fact that PEEK needs a cavity surface temperature of up to 220°C, is it important...

Hongke Mould is an experienced factory certificated by ISO9001:2015/ISO13485:2016/ISO14001:2015, we are focusing on developing, design, manufacturing plastic injection mold making and injection molding for medical repair parts mould. Making Capabilities: --Injection mould design for PEEK interface screw. --Mould manufacturing for medical PEEK interface screw. --In house mold trial and injection molding for medical interface screw. --The secondary process injection molding and assembly even for...

A medical repair anchor mold is use to manufacture medical repair anchors. This mold made by PEEK materials, it has excellent corrosion resistance and high temperature resistance. This kind of products has very strict requirements on the precision of the mold, we made mold flow analysis before the mold design to ensure the balanced filling. The final test of the product is very excellence，no flash and no sink mark. The last but not least, we have rich experience in Medical Nursing Parts Mould,...

PSU high-performance engineering polymers exhibit remarkable chemical and mechanical attributes. PSU mould boast meticulous design. Made of top quality mold insert steel H13, which has a hardness registers between HRC48-52. The final product showcases a flawlessly smooth exterior, devoid of flashes or sink marks, all while impeccably adhering to exacting precision as client requirements. In addition, we are also experienced in various High Performance Material Parts Molds, such as PEEK Mould,...

PEI plastic material celebrated for its exceptional ability to withstand high temperatures, chemical stability, and mechanical prowess. Our PEI Mould are meticulously crafted to cater to intricated and multifaceted product needs, aligned with exacting technical and performance criteria. Employing top-grade H13 mold steel for mold making, we ensure our molds possess remarkable durability and high hardness (HRC48-52). Our stringent quality control measures encompass delicate polishing of mold...

PPSU Mould is used for injection molding of PPSU high-performance material products. The Mold steel is S136, carefully crafted with our sophisticated mold making technology and professional mold knowledge. Tailored to meet your specific requirements, 1*1 type injection molding of the cavity enables unrivaled product quality. Our molds are guaranteeing durability and reliability in production cycles of up to 500,000 shots, providing you with a high quality long-term solution. Our PPSU molds...

Recognized for its excellent high temperature resistance, chemical stability and mechanical properties, PEI material has become the material of choice in many fields. Our PEI Mould are designed for sophisticated and complex products to meet demanding technical and performance requirements. We used high-quality H13 mold steel for mold making to ensure high hardness (HRC48-52) and excellent durability of the mold. We strictly control the mold quality, and polish the surface finish of the mold...

BMC is a special composite material, usually composed of polyester resin, filler materials (such as glass fiber, short fiber, etc.) and additives, with the characteristics of high strength, corrosion resistance, strong insulation, high temperature resistance and plasticity. BMC materials are widely used in automobiles, electrical equipment, construction, communications and other industrial fields for the manufacture of various parts and components, such as lamp housings, sockets, switches,...

This is a babyplast mold made by our company, which can be injection molded to produce very precise medical products. The injection molding products of this mold are widely used in Fixation in Arthroscopy repair, especially rotator cuff (shoulder) and hip glenoid lip repair. Because PEEK requires a cavity surface temperature of up to 220°C, it is important to consider uniform tempering of the tooling during design. The thermal distribution in the tooling must be calculated and optimized...

We have extensive expertise in mold making for PEEK Mould. Due to the good heat resistance of PEEK material, the temperature span during injection molding usually needs to be between 320°C and 390°C. The temperature requirements of PEEK molds are also relatively high, often between 140 °C and 180 °C. The mold steel we chose S136 as the main mold making material, and the hardness level is HRC48-52, which ensures a solid performance. The mold configuration adopts a 1*1 cavity layout, and the...

Our main business is mold making solutions for top-tier precision molds, underscored by our wealth of expertise in crafting molds for PEKEKK Mold. This PEKEKK Mould is a cold runner mold sporting a 1*1 cavity setup, meticulously designed to ensure the exacting precision demanded by our clientele. The mold's surface undergoes meticulous polishing to safeguard the ultimate aesthetic quality of the product post the injection molding production process.

We have extensive expertise lies in mold making of PEEK Mould. The mold temperature requirement of PEEK mold is high, often ranging from 140℃ to 180℃. Injection molding necessitates an even higher temperature span, typically between 320℃ and 390℃, owing to PEEK material's commendable ability to withstand elevated temperatures. Our choice of mold steel centers on S136, boasting a hardness level of HRC48-52, ensuring robust performance. The mold configuration features a 1*1 cavity layout,...

PPA material has excellent mechanical properties, chemical resistance and high temperature stability, and is suitable for injection molding production of products with high strength requirements. This product not only uses PPA material, but also adds 40% GF, which greatly improves the hardness of the product. This PPA mould uses S136 steel in the mold making, and the mold life can reach more than 500,000 shots. With 1*1 cavity, the surface finish is texture, which makes the appearance of the...

We are an advanced manufacturer of medical molds, including: Medical Repair Parts Mould, Medical Inspection Parts Mould, Medical Detection Parts Mould, Medical Nursing Parts Mould. This is a medical mold made by our company, this mold is also called Babyplast mold. This Babyplast mold is very small and is generally used to make medical products and aviation precision parts. The injection molding products of this mold are widely used in Fixation in Arthroscopy repair, especially rotator cuff...

This product is Medical Repair Parts Mould. The injection molding products of this mold are used in Fixation in Arts copy copy copy cuff (shoulder) and hip glenoid lip copy. The mold has a small volume and is often used to make very precise products. It is widely used in the medical and aviation industries. The material used in this product is PEEK, cavity is 1*2, hot runner brand for YUDO. We can provide customers with mold plans according to product drawings, and customize product colors and...

Our Multi Material Molding Process 2K Mold crafted from the highest quality S136 mold steel, which ensure intricate designs are accurately molded with impeccable precision. 1+1 cavity design can realize seamless 2K injection molding, combining PP+20%GF as a strong base material with TPE as an overmolding part, realizing the perfect integration of various materials and components, enhancing product strength and user comfort. With years of experience in mold design and mold making, we have the...

We have rich experience in mold making for PEEK Mould. As we know that PEEK material has good performance of high temperature resistance, which can reached 140℃ to 180℃ when mold making and also can reach to 320~390℃ during products injection molding producing. We used H13 steel with hardness of HRC48-52 in this mold. The mold cavities are 1*2, the surface finish of the cavities is polished.

We have professional mold making experience of 2K mold, We prioritize quality and use the best S136 mold steel to ensure the injection molding life of the mold. The combination of PP substrate part and TPE overmold part in the 2K mold can well improve the aesthetics and functionality of the product while ensuring a comfortable user experience. Our 2K Mold can simplify your production process, reduce assembly steps and production time, which can save you most of unnecessary costs and speed up...

Over Mould technology allows the combination of many different materials on one part, providing more combinations of function and appearance. The base part of the product is made of PP material, and the overmold part is made of TPE. Our superb mold making technology can perfectly combine the overmold and the base part. After injection molding, the product hardly produces sink marks, which can fundamentally Reduce material waste. Product Name：Remote control over Mold Quality Certification:...

PEEK suture anchor belongs to the mold making case of our Medical Repair Parts Mold category. This product is mainly used for repair and fixation of joints in surgical operations. Mold Insert Steel is S136, hardness HRC48-52, mold life can reach 500,000 shots and gate way is hot runner system Hot Tip Gate. We use PEEK material for injection molding production of this product, and the material molding temperature reaches 400°C. PEEK material is expensive and often used in the production of...