PEEK moulding

Our company is mainly engaged in medical inspection part mould mold making and injection molding, including reusable PPSU gastroscope handle. The handle is a commonly used external part of medical surgical instruments. On the one hand, it has to bear a certain pressure, has high requirements for strength, and must be reused, so repeated high-temperature sterilization is required. PPSU material can meet 380~400° high-temperature and high-pressure repeated sterilization , meeting the functional...

PEEK suture anchor are widely used for fixation in arthroscopic repairs, especially in rotator cuff (shoulder) and hip labrum repairs. We are very good at medical repair parts mould mold making and injection molding production. The injection moulding machine controls the process temperature of 400°C and injection pressure up to 3500 Bar, which is one key feature of a stable injection moulding process. Due to the fact that PEEK needs a cavity surface temperature of up to 220°C, is it important...

Hongke Mould is an experienced factory certificated by ISO9001:2015/ISO13485:2016/ISO14001:2015, we are focusing on developing, design, manufacturing plastic injection mold making and injection molding for medical repair parts mould. Making Capabilities: --Injection mould design for PEEK interface screw. --Mould manufacturing for medical PEEK interface screw. --In house mold trial and injection molding for medical interface screw. --The secondary process injection molding and assembly even for...

Aircraft wing parts are among the most important plastic components of an aircraft. This wing mold is made by using S136 steel, which can fit the requirement of a life span of over 500,000 shots. In the production of aircraft plastic parts, ABS material is commonly used due to its high performance, high hardness, and high melting point. These characteristics make it to meet the ideal performance requirements of aircraft. The product boasts a texture surface finish that enhances its refined...

A medical repair anchor mold is use to manufacture medical repair anchors. This mold made by PEEK materials, it has excellent corrosion resistance and high temperature resistance. This kind of products has very strict requirements on the precision of the mold, we made mold flow analysis before the mold design to ensure the balanced filling. The final test of the product is very excellence，no flash and no sink mark. The last but not least, we have rich experience in Medical Nursing Parts Mould,...

BMC is a special composite material, usually composed of polyester resin, filler materials (such as glass fiber, short fiber, etc.) and additives, with the characteristics of high strength, corrosion resistance, strong insulation, high temperature resistance and plasticity. BMC materials are widely used in automobiles, electrical equipment, construction, communications and other industrial fields for the manufacture of various parts and components, such as lamp housings, sockets, switches,...

This is a babyplast mold made by our company, which can be injection molded to produce very precise medical products. The injection molding products of this mold are widely used in Fixation in Arthroscopy repair, especially rotator cuff (shoulder) and hip glenoid lip repair. Because PEEK requires a cavity surface temperature of up to 220°C, it is important to consider uniform tempering of the tooling during design. The thermal distribution in the tooling must be calculated and optimized...

The Babyplast Mould is ideally suited for precision-driven injection molding of diminutive plastic components, a characteristic that finds widespread utility across an array of industries including medical devices, stationery, and toys. The mold for this endeavor is expertly hewn from S136 mold steel, boasting an HRC48-52 hardness level, and an impressive mold life of 500,000 shots, a figure that can be substantially exceeded through proper maintenance. The mold cavity is adeptly fashioned into...

Babyplast Mould is suitable for injection molding of small plastic products that require high precision, and is commonly used in various product fields such as medical products, stationery, and toys. The mold for this project uses mold steel S136 with hardness of HRC48-52, and the mold life is 500,000 shots, which can be higher than 500,000 shots if maintained properly. Mold cavity is 1*2 cavity, which is also a common cavity configuration for babyplast mold. Due to the small mold and machine...

We have extensive expertise in mold making for PEEK Mould. Due to the good heat resistance of PEEK material, the temperature span during injection molding usually needs to be between 320°C and 390°C. The temperature requirements of PEEK molds are also relatively high, often between 140 °C and 180 °C. The mold steel we chose S136 as the main mold making material, and the hardness level is HRC48-52, which ensures a solid performance. The mold configuration adopts a 1*1 cavity layout, and the...

We have extensive expertise lies in mold making of PEEK Mould. The mold temperature requirement of PEEK mold is high, often ranging from 140℃ to 180℃. Injection molding necessitates an even higher temperature span, typically between 320℃ and 390℃, owing to PEEK material's commendable ability to withstand elevated temperatures. Our choice of mold steel centers on S136, boasting a hardness level of HRC48-52, ensuring robust performance. The mold configuration features a 1*1 cavity layout,...

We are an advanced manufacturer of medical molds, including: Medical Repair Parts Mould, Medical Inspection Parts Mould, Medical Detection Parts Mould, Medical Nursing Parts Mould. This is a medical mold made by our company, this mold is also called Babyplast mold. This Babyplast mold is very small and is generally used to make medical products and aviation precision parts. The injection molding products of this mold are widely used in Fixation in Arthroscopy repair, especially rotator cuff...

This product is Medical Repair Parts Mould. The injection molding products of this mold are used in Fixation in Arts copy copy copy cuff (shoulder) and hip glenoid lip copy. The mold has a small volume and is often used to make very precise products. It is widely used in the medical and aviation industries. The material used in this product is PEEK, cavity is 1*2, hot runner brand for YUDO. We can provide customers with mold plans according to product drawings, and customize product colors and...

We have rich experience in mold making for PEEK Mould. As we know that PEEK material has good performance of high temperature resistance, which can reached 140℃ to 180℃ when mold making and also can reach to 320~390℃ during products injection molding producing. We used H13 steel with hardness of HRC48-52 in this mold. The mold cavities are 1*2, the surface finish of the cavities is polished.

PEEK suture anchor belongs to the mold making case of our Medical Repair Parts Mold category. This product is mainly used for repair and fixation of joints in surgical operations. Mold Insert Steel is S136, hardness HRC48-52, mold life can reach 500,000 shots and gate way is hot runner system Hot Tip Gate. We use PEEK material for injection molding production of this product, and the material molding temperature reaches 400°C. PEEK material is expensive and often used in the production of...

The Babyplast Mould caters to the precision-centric injection molding of diminutive plastic items, often used in sectors like medical devices, stationery, and toys. Employing S136 mold steel with a robust hardness registering HRC48-52, this mold guarantees a minimum lifespan of 500,000 shots, a figure that can significantly surpass this threshold with proper maintenance. Sporting a 1*2 cavity configuration, this setup is a conventional choice for Babyplast molds. Owing to its petite mold and...

This is an aero injection moulding for airplane wings parts designed and produced by our company. Aero structural components, often referred to as aerospace structural components, are crucial parts used in the construction and assembly of aircraft, spacecraft, and other aerospace vehicles. These components are responsible for providing the necessary strength, stability, and support to the overall structure of the vehicle, ensuring its safety, performance, and aerodynamic characteristics. Aero...

This is the steering wheel mold that our company designs and manufactures according to customer products. We are an advance auto parts manufacturer in the mold industry. With rich experience in production: Auto Functional parts, Auto Interior parts, Auto Structural components. This steering wheel mold is an over mold. The material of this product is PUR. The mold steel is S136, and its mold life is 500,000~1,000,000 Cycles. The Mold Base Steel is S50C. The cavity is 1*1, and the surface finish...

This product is custom 2K mold for over moulding cover. 2K molds offer a range of advantages, including enhanced design possibilities, reduced assembly steps, improved functionality, and cost savings, making them a valuable tool for industries seeking to produce complex, multi-material, and aesthetically appealing parts efficiently. The mold is made of high quality mold insert steel S136 and the hardness of the steel reaches HRC48-52, the life of the mold can exceed 500,000 shots or more when...

Our company specializes in designing and customizing high performance material parts mould, including PEEK Mould, PSU Mould, PPSU Mould, PEI Mould, PEKEKK Mould and PPA Mould. PEEK maintains its properties in harsh conditions, including exposure to radiation, extreme temperatures, and aggressive chemicals. PEEK has inherent flame-resistant properties and meets various flammability standards without the need for additional additives. This product is a PEEK+30%GF High Performance Material...